Ships from the heart of Missouri to all 50 states and Puerto Rico.Ships anywhere in the U.S.Shop new arrivals
Menu
Light or dark mode

Ships from Hartville, MO · Anywhere in the U.S.

Gear Review ·  · Video

Troy Industries AK 47 Full Length Rail Review

Troy Industries with their AK47 rail system brings wave of fresh air into the AK world. Their rail design clearly separates Troy from the crowded “AK Rails” market. However, more conservative AK users will probably find this design way too extreme. Personally I like it a lot, because their rail offers fantastic ergonomics and it really helps to better control rifle. At this point Troy makes 2 different lower parts (short and long) and has 1 extra railed gas tube part as well. All these are independent from each other and you don’t need top part to use lower part and vice versa. Now, when lower part is rock solid, we did encounter some problems with railed gas tube replacement. Mounting for it is based on small size castle nut and we had a hard time to keep that nut from untwisting. I’m looking now for dedicated wrench for it (it is different size than traditional castle nuts) and we will go back to this issue again in future episodes. Overall, Troy made a darn solid product and i’m very pleased with it. Please note that this rail will not mount on AKs with 24mm front end!
Weight specifications:
Top Rail (railed gas tube): 5.68oz (161 grams)
Lower Rail Full Length: 10.98oz (311.27 grams)
Short Rail: 8.80oz (249.47 grams)

Here is Troy Industries AK 47 Full Length Rail Review:

Sound off

Comments

  1. Brandon Osborne

    Hey guys. I’m new to the ak world and I’m looking to get a C 39 classic. Can you tell me it the troy lower rail will fit? Thanks Brandon

    Reply

    1. RobAKOU

      Hi Brandon, sorry but Troy rail will not fit into C39…

      Reply

      1. Dee

        Can a regular gastube with wood upper handguard be used with this lower troy handguard?

        Reply

        1. RobAKOU

          Yes

          Reply

    2. Eric

      I know this is an old thread/post, but if anyone was interested in running this extended on their AK with 24mm front sight base…IT FITS NOW…20min install. Video was helpful, it’s tricky to adjust at first, but patience and it’s done.

      Reply

      1. RobAKOU

        Very cool, good to know!

        Reply

        1. harold vanduyne

          Hi Rob.
          I’m new to the Ak platform, I just purchased a c39v2 and I want to put the long Troy rail on.
          Can you elaborate on Just how much dremel work will have to be done and what parts will
          it have to be done to. I was looking at magpul but I don’t want to cut the lower guard retaining ring
          And the Troy looks so much better. Thank you.

          Reply

          1. RobAKOU

            Harold, i honestly don’t know because i can’t check it because i don’t own C39V2 anymore…

  2. Asamurai

    Why does the Troy rail not fit? Is it just a matter of reducing the size of the tab that goes into the front of the receiver, to fit the smaller opening below the barrel for the front hand guard to mount? Or is there some other reason that it does not fit?
    I am very interested if this hand guard could be modified to work with the C39s because it is so light.

    Reply

    1. RobAKOU

      You would have to do some modifications with Dremel tool to make it fit. Would be possible? Yes, but God knows how this would hold up during extended use…

      Reply

  3. Mark

    Does the lower extended handguard work with the Ultimak gas tube?

    Reply

    1. RobAKOU

      Yes, it does.

      Reply

  4. Marc

    Posted on your Facebook site also. The gas tube rail has been upgraded to a 7/8 in nut instead of the castle nut. Going to order the complete package, short bottom with 3 rails next week. Looking forward to some shooting. Kind of has a PTR 91 look at quick glance.

    Reply

    1. RobAKOU

      Yes, they did listen to us. Still, don’t forget to use blue loctite on it. On these 2 side screws as well.

      Reply

      1. Thomas

        Hello can I put this on sam7 sf

        Reply

        1. RobAKOU

          No, it will not work.

          Reply

  5. Matt krupke

    We were able to mount one of the short Troy handguards on a C39 Sport Tactical with only minor modification. There is a picture on our facebook page here: https://www.facebook.com/lrkmechanical

    Reply

    1. RobAKOU

      Very cool. Is it holding up nicely?

      Reply

  6. bryan h

    Will this fit a 1987 wasr10

    Reply

    1. RobAKOU

      Yes, it should.

      Reply

    2. RobAKOU

      Yes, it should fit WASR.

      Reply

  7. Jon

    Will the the top gas tube fit the Yugo NPAP M70 ak? If it does which is better ultimak or troy?

    Reply

    1. RobAKOU

      Ultimak version for Yugo is better. More stable mounting system.

      Reply

  8. Tommy Cucuzella

    do you guy plan on doing a torture test of the lower rail? like the dragging it up a river and behind a truck?

    Reply

    1. RobAKOU

      Tommy, no, at that time we didn’t have our “truck dragging” fun in place yet, so that rail get off easy…we have too much new stuff coming out now, so there is no time to get back to it…

      Reply

      1. Tommy

        Just based on handling it though, do you believe it would have held up?

        Reply

        1. RobAKOU

          75% probability that yes, it would survive. My only beef is with their locking bolts – you need to use loctite or they will get loose from recoil…now with dragging behind the car and tree dropping, that’s a lot of “shock and awe” for that rail mounting system…

          Reply

          1. Tommy

            Okay. thank you for the quick responce!!

  9. nic

    which Troy rail sections did you use? M-lock or the normal Troy ones?

    Reply

    1. RobAKOU

      Regular Troy sections.

      Reply

  10. Carlos Velazquez

    I am wondering if the lower rail would work or fit on a Norinco Mak 90. Has anyone you know tried it yet?

    Reply

    1. RobAKOU

      I didn’t try…i honestly have no clue…

      Reply

  11. Chris Carson

    Will the the short and long rail work on a Yugo n-pap M70?

    Reply

    1. RobAKOU

      Hi Chris, sorry, these will not work…

      Reply

  12. Vyrro

    Hdy guys, i just wanted to add something here. The LONG troy bottom rail will only fit a c39v2 with modification. You absolutely must cut off the gas block mounted sling loop and grind it down so no nubs are showing on the top and bottom. Also, and this is important, you absolutely must remove material from the the bottom rear of the picatinny railed top section of the troy long AK rail. This is a must in order to give the rail clearance from the gas block. You could remove material from the gas block but i do not advise this at all. You could screw it up massively, and grinding the aluminum of the troy rail is much easier than grinding the steel of the gas block. I have done this and it only took a few hours. Only remove a little material at a time and check the fit often. I have pictures if you want to see so you may email me if you care to see them. The end result turned out very nicely, and you cannot see ANY grinding marks because they are all done on the inside of the rail.

    Reply

    1. Jeff Armstrong

      I would like to see pictures.

      Email at [email removed]

      Reply

  13. Vyrro

    I forgot to add something. The c39v2 does not have a large enough opening in the front trunnion to fit either of the troys rails, unless to remove the two rear screws on the very back of the troy AK rails. This does not matter much because this block is still tightly secured by two more screws on the sides of the rails. I believe Rob ski covered something similar to this when he did the “under the hood video” of the c39v2 and he clearly stated that standard handguards will not fit without dremel/removal modifications to the rear of the handguards. The opening on the c39v2 is the proper depth but it does not have the proper height and width specs. This is not a big deal in my humble opinion because the troy rail still fits and is very secure with blue loctite. I must also strongly reinforce Rob Ski’s statement to place whatever extra rail segments in place BEFORE you install the rail and preferably before you use the blue loctite just to make your life easier.
    I just got my c39v2 a couple weeks ago, and other than the modifications i have listed, the rifle has been a dream. All other furniture install very easily and is secure. 1k rounds through it so far and not a one malfunction other than a singular FTF due to an old chinese magazine with a kinked spring. Nothing to do with the rifle. Sorry for being long winded, i just wish to help my fellow AK shooters if they are in the same boat as me. Keep shootin straight and above all else, be safe!

    Reply

    1. Newbie

      Vyrro how are the mods holding up? Very interested as my v2 is getting pretty lonely without any pretty tactical clothes. Any pics?

      Reply

      1. Vyrro

        guess i’m a year late, but the mods i did have held up wonderfully. My c39v2 has survived for a little over year and about 3,500+/- rounds of tula, wolf, remington, and silver/brown bear ammo. No issues whatsoever. I just put about 3 drips of blue loctite on both of the hex screws for the troy long bottom rail, and it has held solid through everything. I lent my AK to a buddy for a tactical carbine course that involved quite a bit of dropping and other more rugged use. Alas, the rail and every other mod has held up perfectly. Hope you’re doing alright. Sorry for delayed response if you read this.

        Reply

  14. Paul

    Good day

    Absolutely depend on your reviews and advice . New to the ak47 world but definitely addicted.

    Quick question.. Would either rail fit a new generation I.o. Inc. Ak? The muzzle brake is 3 inches or so away from the front sight which seems diff. Thanks

    Reply

    1. RobAKOU

      Short one should fit. But i’m not 100% positive…
      Also, you should be very careful with IO…they don’t have very good reputation to say at least.

      Reply

  15. Doc Mongo

    First let me say that you channel and store are awesome. I appreciate the no bullshit approach you guys have in reviews.
    No on to my question. Do you know if the Troy rail would fit on a DDI stamped receiver or the RAS 47? Also are you all going to do anything else with the RAS 47? The accuracy looked promising, until it kinda shit the bed on your tests. Did the receiver maybe get a small bend in it during the drive over test?

    Reply

    1. RobAKOU

      Troy rail should fit both, DDI and RAS47. Small trimming maybe required, but nothing major.
      @RAS47 – we can’t do anything more, because Century didn’t like our review and they took those rifles back…so, no more RAS47 or C39V2…too bad, because i thought that accuracy is really their strong point.

      Reply

      1. Doc Mongo

        Wow that’s unbelievable, not doubting you just shocked at the “take my ball and go home” mentality. I liked what I heard as far as accuracy on the RAS 47. But the test honestly scared me away from it some. I don’t plan on running it over anytime soon, but seeing that flex and the failures after have me questioning their receiver.

        Reply

  16. Vance

    Hey rob! Thanks for great products! And thanks for the responses! Now here’s 2 q. I hear this will not fit on 74 style with the larger barrel ending? And also what is your most preferred ,extended rail system? I Know of Troy,krebs,Midwest just isn’t nice looking and same with tws. I love the zenit rail but I wish it extended all the way out …what are your top extended rails?

    Reply

    1. RobAKOU

      The best extended rail is this:Zenit B30 Lower Rail Lon

      Reply

  17. Corey

    I work at a retail gun store and most of the century arms wasr we see have a lot of issues, I have read very bad reviews on DDI, I need new main ak and am having hard time choosing next one! What’s your over all pick right now? Please.

    Reply

  18. Kwilliamsjr

    So, I’m looking at getting this real. But I’m finding to fit my saiga I need to remove the fsb and have a lower retaining handguard? What handguard would you recommend that I won’t have to do this much work that is gonna give me room for furniture ? Or should I remove the fsb and thread the barrel and bring this russian rifle back to its splendor?

    Reply

    1. RobAKOU

      I would do the conversion. Don’t settle for less!

      Reply

  19. USMC.Haan

    I’m finally getting my wasr 10/63 back from RD it’s been a long wait, but I am curious about on which optics to compliment the rifle. Suggestions?

    Reply

    1. RobAKOU

      Get that micro dot, works great: NEW Primary Arms Micro Dot MD ADS 50K Hour Battery Life

      Reply

  20. Travis

    Will the Troy full length rail fit on arsenal sam7sf? Help please!

    Reply

    1. RobAKOU

      Sorry, but it will not fit.

      Reply

      1. Haider

        Hello Rob, would you please say which area that the Handguard will not fit in Sam7sf the length or the receiver end will not accept the Handguard, please advise
        Thanks

        Reply

        1. RobAKOU

          I have no clue. Please check with Troy, they will know for sure.

          Reply

          1. Justin G

            I just called Troy and they assured me the current design will work on the Arsenal Sam7SF with the 24mm threads. I’m going to order the long rail and find out here for certain in the coming weeks. I will update regardless of outcome.
            Love you guys videos.
            -Justin of Georgia

  21. angel

    hi can the extended bottom lower rail fit the Century Arms RAS-47 or a Romanian SAR-1 AK-47

    Reply

    1. RobAKOU

      It should fit. Check with Troy to make sure, but it should fit.

      Reply

  22. john

    Can you comfortably put an angled fore grip on with the Troy full length? I am worried about the gap thats at the front.

    Reply

    1. RobAKOU

      Yes, i think there was enough room for it

      Reply

  23. Michael

    Will Troy industries long rail fit Arsenal slr 107fr? And if not which rail would you recommend instead? Also do you prefer red dot mounted over dust cover or on railed gas block? Thank you

    Reply

    1. Michael

      Gas tube* not gas block

      Reply

    2. RobAKOU

      No, it will not clear…

      Reply

  24. Chris

    will the lower fit on an ati at-47 yugo with grenade sight? ive already cut my grenade sight to accommodate the troy top rail. it fit without cutting but did not leave enough room for the eotech 512 (the one with the long base) so it got dremeled.

    and sorry if you covered this, but will the cleaning rod fit in the extended lower? pics look like it does.
    and would the sling ring need to be cut off to accommodate the extended lower? id hate to do that but its getting in the way of almost any lower i look at. the pic makes it look like your sling ring pokes out in the gap on the lower.

    its tough to find parts for this rifle that are an ‘out of the box’ solution. id like something distinctive like this system. ive contacted tws and they are going to release a 2.5 yugo version of their system compatible with my gen 2 dog leg but even that will cover the grenade sight entirely. MI systems , i was lucky enough to find at a local store and found none of the lowers would fit properly, so even though they are cool, its not a fit. please give me good news on this one. the pics make it look promising.

    Reply

    1. RobAKOU

      It will not fit.

      Reply

  25. Mike H

    I have this rail (long lower & upper) on my Saiga AK-74 conversion. I love the ergonomics of it and prefer to keep it on the rifle. However, I am at a loss as to how to keep the damn thing on. I have tightened the two bolts holding the lower to the frame time and time again. I have even put red locktite on the bolt threads but sure enough…the rail will wiggle itself lose after some sustained fire (usually within 5 mags worth).

    Rob: I plan on brining this rifle to the training next week in Boulder City, NV. I will bring a back-up in case the same issue persists. Maybe you can share some thoughts on how to deal with this problem.

    Reply

    1. RobAKOU

      Good idea. Let’s see what we could do with it.

      Reply

  26. Daniel S.

    Rob, I am trying to decide on which handguard to put on my new DDI. I have it narrowed down to the Troy Long rail or the Magpul Zhukov. Which do you prefer? You give favorable reviews for both. Thanks!

    Reply

    1. RobAKOU

      Magpul Zhukov: better mounting system

      Reply

      1. Daniel S.

        Thank you for the help! Love your page and that you help other AK lovers! Hope to make a class in the near future!

        Reply

  27. Will

    What is the oal of the hand guard I have been searching for specs but can’t seem to find any

    Reply

    1. RobAKOU

      I think it was like 13 or 15″. I don’t have it anymore.

      Reply

  28. Vern

    Will the long Troy rail work on O PAP?

    Reply

    1. RobAKOU

      Negative.

      Reply

  29. Tim Hruby

    Will the short Troy rail for my m85np

    Reply

  30. terry

    Troy short handguard fit c39v2 ?

    Reply

    1. RobAKOU

      No idea. Check with Troy.

      Reply

  31. Brad townsend

    How about the ras47?

    Reply

    1. RobAKOU

      I have no idea. Check with Troy to make sure…

      Reply

  32. Aaron

    Would the short version fit my fime vepr?

    Reply

    1. RobAKOU

      It should.

      Reply

      1. Aaron

        Thanks rob! Keep making your great videos!

        Reply

  33. Jack ack ack

    I finally converted the saiga .308 with pistol grip, trigger group from dinzag and a archangel stock. Like you, I also like some wood on her and I like the lower factory grip. I love the archangel set-up on my Norinco sks but the buttstock for the ak is just not good. Whats a good hand grip for the .308 without modification? I am sure as hell not going to cut into the barrel. Also, will the zhukov stock hold up to the larger caliber. Thanks. I love the union!

    Reply

  34. Jack ack ack

    Hand guard not grip, rob.

    Reply

  35. Andrew

    I like the way this rail looks and possibly functions, can anyone confirm if this would fit on the Arsenal SAM7SF?

    Reply

    1. RobAKOU

      I don’t think it will work with milled receiver…try to ask them directly man.

      Reply

  36. Dylan Gonzalez

    Hi Rob,

    Do we think this rail would work with the new PSA AK-103? Thanks for all your work.

    Reply

    1. RobAKOU

      I have no idea. Best to ask manufacturer. But I will tell you, i never managed to secure those tension screws back then…they always found a way to become lose.

      Reply

  37. Gregory

    Hi Rob,

    Will the troy industries handguard fit well on an Arsenal SLR 107?

    Reply

    1. RobAKOU

      It should fit, but i wouldn’t recommend doing it. I could never stop those screws from unscrewing on their own…

      Reply

  38. Darren Henry

    Hey do you think this will fit a Zastava zpap m90

    Reply

    1. RobAKOU

      No, you need Yugo specific accessories.

      Reply

Leave a comment

Your email stays private. Comments show once they are approved.


Entry check

Are you at least 18 years old?

This site’s content is intended for people at least 18 years of age.

No

We’ll remember your answer for 14 days.